FORMA WORKS — Material and care conversation guide
Demonstration guidance, not a product warranty or technical certification.

Laminate surfaces
Begin with a soft slightly damp cloth and a mild neutral cleaner approved by the actual surface supplier. Avoid soaking seams. Test any cleaning product on an inconspicuous area before broad use. Abrasives may change the sheen.

Wood veneer
Avoid standing water and prolonged direct sunlight. Keep heat sources away from the surface. The finish system governs cleaning and maintenance, so request the actual coating specification. Natural grain and colour vary.

Powder-coated metal
Remove grit with a soft cloth before wiping. Harsh solvents and metal scouring tools may damage the coating. Chips or exposed metal need advice from the actual manufacturer, especially in damp environments.

Upholstery
Identify the fibre composition and the fabric manufacturer's care code. Vacuum with a suitable attachment. Never assume that every fabric tolerates the same stain remover or steam treatment. Ask for a documented cleaning method.

Specification checklist
Request a physical sample, declared material composition, intended use, maintenance instructions and any relevant independently verifiable test report. A standard name or colour swatch is not proof of compliance.

The illustrated finishes and sample dimensions in this theme are fictional. Replace them with verified product information before commercial publication.
